alisonken1

About

Username
alisonken1
Joined
Visits
57
Last Active
Roles
Member, Moderator

Comments

  • Hello Hakan - PJLink is a standard for controlling remote display devices; as such it only defines controls for power on/off, shutter, volume/microphone volume, and video input source selection (hardware input). PJLink does not specify how to share…
  • Hello - As far as the networking goes: - 192.168.5.255 ( or any address ending in *.255) is a broadcast address or network mask. - OpenLP only supports the PJLink network protocol. As noted, PJlink default port is 4352 - and ports larger than 32767…
  • Hello Phil - Just to let you know, it appears that the 2.4 series of OpenLP will no longer be supported for non-security related fixes. OpenLP v3.0 will have a fix for this issue, but I'm unsure of the exact date when OLP 3.0 will be available. Wit…
  • Thanks Phil - that was it. Apparently ViewSonic is among the growing list of manufacturers that _says_ their equipment is PJLink compliant. Unfortunately, this is an example of the manufacturer not writing their code to _full_ compliance. Original…
  • Hello Phil - OK - if you could start OpenLP with the debug option and try to see if you can get the same error. After you get the error and close the program, I would like to see the debug log that was generated. To enable debug mode and  post the…
  • Hello Phil - 1 - What version of OpenLP are you running (under Help -> About) 2 - What operating system and version are you running it on? 3 - Can you send a log file of when this happens? See https://manual.openlp.org/troubleshooting.html#what…
  • Ken in California, USA
  • Hello CCAG - I usually find that when the themes appear different after restarting or turning off/on your system that the computer has changed the settings on the display going to the projector (or in your case, the TV's). I would suggest that befo…
  • As far as the PJLinkTEST4PJ application, I'm not sure why it's accepting a non-standard class request (windows binary - and I don't have windows) - if it was validating the projector output it should have rejected the class version request since the…
  • Hello Funkaloss - I found the problem (Benq projector is not sending a valid standard class reply - Optoma is another projector that does this). Unfortunately, OpenLP 2.4 series is being replaced with OpenLP v2.6 soon and I'm not sure if there will…
  • At this time, only PJLink certified equipment can be controlled by OpenLP. Currently, the focus is on updating OpenLP to be compliant with the recently released updated standard to PJLink. DLNA compatibility would be a wishlist item that can be rese…
  • The bibles that are available as download when you first install OpenLP (KJV, ASV) can be used at any time - they're out of copyright. Any other bible you have to look at the copyright date (pretty much any bible that the copyright is 120 years old…
  • Might also want to see if updating your A/V software will help.
  • if you are SURE that you downloaded OpenLP from our website at https://openlp.org, then you can tell the A/V software to allow. This is a known issue that the devs are trying to work on with the A/V software companies.
  • http://manual.openlp.org/projector.html  will show you how to tell if you are talking to your projector. If you don't have the Projector Manager window open (should be on the bottom-right side below the Theme Manager), you can enable the Projector …
  • A couple of notes: * Both the projector and OpenLP seem to use this IP. If this is the case, then you need to ensure that both your computer and the projector are using different IP addresses. Also, you need to ensure that your projector is set up…
  • One thing you want to do is setup the projector so it has a fixed IP address. Talk with your techie about that part. n either case whether you're using DHCP (dynamic IP assignment) or manual IP assignment, after the projector is setup to talk on t…
  • Look at the manual under "Songs". What you want is about 3/4 of the way down the page under "Adding or Editing the Lyrics" When editing lyrics, you will see an option for "Optional Split" - place your cursor at the poin…
  • You have 2 options: forced-split or optional split. Edit the song/verse, select 'Edit All', and you will notice tags that look simiar to: ---[Verse 1]--- This is a hard split. Another verse tag is [---] This is an optional split. The differe…
  • Also - could you post the information about your projector? make, model, type, etc. A link to the manufacturer page on that particular projector would also be helpful.
  • thestevo - Also, while you're logging, could you exercise all of the options from power on to the other projector control options, to power off? Thanks
  • Hello thestevo - As far as the projector goes, if you can start OpenLP with logging set to debug, then post the log as an attachment here, I can have a look and see what's up. The easiest way to start debug mode is from command line - 'openlp -l d…
  • There is a good chance they are correct at this time. What is the make and model of the LED display?
  • Hello Rich - It sounds like either an OSX or Dropbox thing to me.  I would suggest saving the file in the "services" subfolder, then copying it to your Dropbox folder for now until someone a little more knowledgeable about Dropbox and OSX …
  • Hello philiptory  - The way it normally works - - On your desktop, create a list of what you would like to show at church in the Service Manager. At this point, you can also optionally rearrange the order of the items. - Select File -> Save Serv…